Olympic Champion Shooting Glasses - Frames Only

Includes:  Champion Olympic shooting frames, hard plastic case - blue (#41007), allen key screwdriver (#41190), & right angle bar (#41074) and a target lens holder (cube shaped attachment between the angle bar and lens holder-#41080) for attaching a lens holder size of your choice (not included).

Note: Does NOT include lens holder or eye blinder accessories. Sold separately.  

  ADVANTAGES OF OLYMPIC CHAMPION:
1. Bridge height micro-adjustable
2. Silicon comfort bridge, individually adjustable
3. Target system micro-adjustable
4. Shield micro-adjustable
5. Temple length micro adjustable
6. Temple-ends made of non slip silicon
7. Spring hinges for maximal comfort
8. All adjustments possible while frame is being worn
9. Lightweight construction using space technology materials, such as titanium etc.
10. One single frame suits all disciplines

Accessories (all sold separately):
1. Lens Holder (Required):

Add a choice of lens holder diameter size of 42mm (#42001), 32mm (#32001), or 25mm (#25001).  

2. Lens (Required):

Add a standard non-power or corrective lens for 42mm (#CHC), 32mm (#C32), 25mm (#C25).  Or take your lens holder to your Optician to get a custom prescription lens cut.

3. Eye Blinder or Second Lens Holder for Non-Aiming Eye (Required):

Eye Blinders for the non-aiming eye.  ISSF approved 30mm Wide Blinder (#41034) or a larger not ISSF legal blinder with bent side blinder (#41035) allowed in non-ISSF conforming matches.  
---  Or
Add second lens holder for the non-aiming eye.  You would need to order a right angle bar (#41074) and a target lens holder (#41080) in addition to your choice of another lens holder and lens.  (One #41074 and one #41080 are already included with the frames so you would need one additional of each for the second lens holder). Alternatively, you can forgo additional adjustability provided by the right angle bar and target lens holder and only order a lens and a 42mm STRAIGHT Lens Holder (#42020) that will attach directly to the frames for the non-aiming eye. 

4. Side Blinders (Optional):

Side Blinders - transparent (#41051) or opaque grey (#41052).

5.: Centering Device (Optional):

Centering Device - Used for aligning the center of the lens in shooting position.  Removed after alignment is finished during shooting. 42mm (#42009), 32mm (#32024), or 25mm (#25009).

6. Adjustable Iris (Optional):

Adjustable Iris that fits over the lens.  42mm (#42024), 32mm (#32024), or 25mm (#25024).

7. Clip-on Color Filter (Optional):

Clip-on Color Filter for Lens: 42mm yellow (#42006), 42mm grey (#42004), 25mm yellow (#25006), 25mm grey (#25004).

Technical Information for your Optician if you are getting a custom prescription lens cut:
The rifle shooter is usually given his distance vision prescription. However, the pistol shooter normally needs an additional +0.25 or +0.5 dpt., so that both front and rear sights are seen clearly. The pistol shooter can tolerate a small amount of blurring of the target.